Huawei B315s-936 Unlock/Openline, Debrand/Full Admin Access Tutorial(New/Blue Label)

Requirements:

1. MALE USB to MALE USB

2. LAN CABLE

3. PC or Laptop mas maganda if windows 7 para wala maging problema.

ok lets start yung nakikita nyong picture sa baba is board ng 936(blue label/New) kaylangan po naten pag dikitin ung nasa red circle bahala po kayo diskarte nyo napo kung papano gagawin yan make sure lng na yan lang po yung pagdidikitin. 

make sure lang din po na yan lang yung magdidikit meron pa kasi sa likod yan. after mapag dikit ikabit napo naten yung lan cable at male to male usb sa likod ng 936 board to PC/Laptop then iplug na po yung adaptor if merong umilaw meaning hindi po naten napag dikit ng maayos dapat po walang iilaw ni isa. 

Next Step
DOWNLOAD po muna naten yung kaylangan na software. CLICK HERE!!!

Debrand Procedure: 

1.After madownload open nyo yung driver folder click FC_Serial_Driver_Setup.exe to intall.
2.Next open punta naman tayo sa balong folder click si Balong_USB_Downloader_1.0.1.10.exe tapos Click detect button then click ung may tatlong tuldok browse File usblsafe-b315.bin then click open then click load button wait mo mafull yung loading bar sa ilalim after mafull pwede na nateng iclose si balong.
3.Open naman yung Flash File na folder then click muna yung go_hdlc.exe then Enter lang naten para magclose after close click na naten yung Huawei_Flasher_v2.exe then hanapin mo yung 3G PC UI INTERFACE NA PORT(com?) example ang nakalagay dyan sa question mark is COM9 type mo sa comport is COM9 then click napo naten si FLASH button then wait po naten matapos magflash hangang 11.bin po yan after po ng bin.11 mainstall may mababasa kayong remove battery pwede napo nateng iunplug yung saksakan ng modem naten at iclose si Huawei_Flasher_v2 dahil tapos napo ang pagdedebarand naten. :D procede napo tayo sa pagoopenline..

Openline Procedure:

1.Open toolbox folder then click E5186 Toolbox.exe click Connect. Huwag i-click ang GET sundin lang po naten ang nasa picture at kung mapapansin nyo sa 3 2

 ang default na nakalagay dyan is 1 gawin nyo lang pong number 2 after po machange procede to number 4.

2.Open PuTTY then sundin lang po naten ang nasa picture after nyan may magoopen na CMD dun naten ipaste ang code na nasa baba pero after po naten ipaste ang code pindutin po muna naten ang ENTER ng limang beses.

NOTE: ang paste sa Putty is right Click lang po sa mouse at kapag napaste napo naten enter lang po naten dapat po may lalabas na ok then after po naten mapaste ang tatlong code nayan. BOOM may debrand at openline napo tayo. :D

Unang code:

at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0 

Pangalawang code: 

AT ^ SYSCFGEX = "00", 3FFFFFFF, 1,2,800C5 ,, 

Pangatlong code: 

AT ^ SYSCFGEX = "0302", 400000,1,2,800C5 ,, 

Globe Wimax Reconnection

A. alamin muna naten kung hackable ba ang wimax mo.

Globe Wimax Model na hackable:

BM622 (version 2009, 2010, 2011)
BM622i (version 2009, 2010, 2011)
BM622m (any)
BM625 (2009, 2010)
BM621 (2009, 2010)

Ganito naman para malaman ang package date mo:

1. Go to your wimax gateway. Default Gateways are:
*BM622,BM625,BM621: 192.168.1.1
*BM622i,BM622m: 192.168.254.1

2. Login ka as: username|password
*BM622 - user|user OR user|0SlO051O
*BM622i - user|user OR user|0SlO051O
*BM622m - user|0SlO051O
*BM625/BM621 - user|user

3. Makikita mo na ang iyong Package Date.

B. Enable your Computer Telnet Client and Server. Ganito yan.

1. Pumunta sa Start Menu
2. Control Panel
3. Programs
4. Programs And Features
5. Turn Windows features on or off
6. Check Telnet Client and Server
7. Press OK and at hintayin mag save.

C. Enable Wimax Modem Telnet

1. dôwnlôad this first:
BM622i 2009-2010: dôwnlôad Here (wait 5 seconds then skip ad)
BM622 2009-2010: dôwnlôad Here (wait 5 seconds then skip ad)
BM622 2011: dôwnlôad Here (wait 5 seconds then skip ad) credits kay heartilly
2. Login ka as user tapos copy mo WAN MAC mo.
3. For BM622 2009-2010 and BM622i 2009-2010, open mo ung dinownload mo knina na passgenerator. Paste mo WAN MAC mo dun.
4. Login kana as admin and paste the generated password.
5. For BM622 2009-2010, go to advance, ACL, check LAN Telnet, APPLY!
6. For BM622i 2009-2010, go to advance, Firewall, disable firewall, APPLY!
7. For BM622 2011, dôwnlôad the admin password generator.
8. Dapat connected na ang BM622 2011 mo at accessible na ito. Irun lng ang software at pindutin ang start, wait ng konti at lalabas na ang password mo.

D. Procedures to Reconnect your wimax:

1. I-dôwnlôad ang software na angkop sa iyong modem.

Big thanks to yyyxyyyz, TheCasper, shyb0i para sa mga software na ito.

-BM622 2009 and 2010: dôwnlôad Here (wait 5 seconds then skip ad)

-BM622 2011: dôwnlôad Here (wait 5 seconds then skip ad)

-BM622i 2009 and 2010: dôwnlôad Here (wait 5 seconds then skip ad)

-BM622i 2011: dôwnlôad Here (wait 5 seconds then skip ad)

-BM622m: dôwnlôad Here (wait 5 seconds then skip ad)

-BM625 2009 and 2010: dôwnlôad Here (wait 5 seconds then skip ad)

-BM621 2009 and 2010: dôwnlôad Here (wait 5 seconds then skip ad)


2. Buksan mo lang yung software at magkabit ng working mac tapos ok.
*Kung wala kang working mac, try mong mag hanap maraming nakakalat dyan! wag po kayo matakot sa blank wan!!

3. Wait tyo hanggang magreboot ang wimax natin, at magkainternet na.

4. Tapos na! Pwede kana maginternet! :)

How to repair bm622 2009 blank wan

enable telnet
follow this

telnet 192.168.1.1
Login: wimax
PASS: wimax820

ATP> display allmacaddr
ATP> setallmacaddr "enter your Mac"
ATP> save
ATP> exit

Upload ng Fresh ADVANCE config file DOWNLOAD HERE
Run the bm622 2011 (Upgrader Tool)
Upgrade to 2011 firmware.


After Successful Upgrade


telnet 192.168.1.1
Login:Firefly
PASS: $P4mb1h1r4N4m4nT0!!

ATP> display allmacaddr
ATP> "set sërïal number command"
ATP> xiugai macdizhi "Your Mac"
ATP> diag restore default

Done! {Blank Wan Solve}

For Manual Upgrade via CMD
1. Copy the bm622firmware.bin to c:\(your firmware file location)
2. RUN cmd
3. cd "c:/" then press Enter
4. tftp –i 192.168.1.1 put bm622firmware.bin
5. wait till finish
6. done!

Seond Way on How to Fixed bm622 Blamk WAN

Huawei BM622 model is the first 4G WiMAX CPE wireless broadband modem supplied by Huawei Technologies from Shenzhen's for Globe Telecom one of the major wireless broadband ISP in the Philippines.

Recently there were so many complains from the 4G WiMAX wireless broadband subscribers that their CPE modem can't access to the internet. They have noticed upon opening the web GUI of the said 4G WiMAX CPE modem Huawe BM622 on the part of WAN interface its MAC address is missing/blank no wonder their connection interrupted or unsuccessful.

Until now there is still an issue of so called "BLANK WAN" of Huawei BM622 4G WiMAX wireless broadband CPE, to solved this problem and issue one should knows in basic electronics skill. BLANK WAN in other words WAN chips the ST Micro/SGS M25P32 sërïal flash Memory IC is corrupted this is due to malicious programming or setting done by user in wrongly manipulations.

These are the things what you need to be able to solved your Huawei BM622 BLANK WAN.

1.50pesos LPT SPI hardware programmer or USB SPI hardware programmer (DIY)
2.TV/DVD SPI Flash programmer software (d0wnl0@d)
3.ST Micro/SGS M25P32 sërïal flash Memory dump binary (ask Google/Forum/Neighbor/Friend)


The procedure to solve the BLANK WAN, first buy or do it yourself LPT SPI hardware programmer. Second is to d0wnl0@d TV/DVD SPI flash programmer, third search and d0wnl0@d BM622 WAN dump file from Google, forum, or d0wnl0@d via TFTP your neighbor/friend BM622 ST Micro/SGS M25P32 sërïal flash Memory dump binaries to your local drive.

DOWNLOAD WAN IC DIAGRAM HERE

If you have all these stuff now you can removed your Huawei BM622 WAN chips ST Micro/SGS M25P32 sërïal flash Memory IC from its board and start uploading via LPT SPI hardware programmer or USB SPI hardware programmer using the TV/DVD SPI Flash programmer software.

Lastly, of course you have to put back your ST Micro/SGS M25P32 sërïal flash Memory IC to its place again. If you are tired of placing it to its original position you can just soldered using 1ft/12 inches tiny wires for simplicity.

Complete Tutorials for Reconnecting DV235T(MyBro) with PEM and KEY

First you need to open your telnet.

Steps How:
Go to control panel/programs/turn windows feature on or off then select "telnet client"

after enabling telnet

1. go to cmd/command prompt/terminal
2. type telnet 10.X.X.X hit enter
3. login with username: mt7109 password: wimax
4. to get the certificates browse to "etc" folder/dir   and to check if it has certificates type "ls"

if you see wmx_client_ca.pem and wmx_priv_key.key there you have it its the certificates
5. now to get the mac address type " sncfg get WAN_MAC " to get the mac address
6. to copy the certificates and mac address right click anywhere on cmd click mark and highlight all 
7. then after highlighting hit enter to copy then paste it in notepad

summary :

open cmd
input "telnet + ip address" (where ip address is equal to 10.X.X)
use the login: "mt7109" and password:"wimax" (without " )
input "cd etc"
input "cat wmx_client_ca.pem"
input "catwmx_priv_key.key"
input "sncfg get WAN_MAC"

or download ready to use SCRIPT HERE with Tutorial How to use inside

After getting certificate,key and mac

create a folder for sorting (optional)
copy the contents of "wmx_client_ca.pem" and paste it on any text editor and save it as "anyfilename.pem"
copy the contents of "wmx_priv_key.key" and paste it on any text editor and save it as "anyfilename.key"
and reserve a copy of mac address in a text file

Changing mac and uploading pem and key to device

1. you can use your old change mac address script (with reboot/restart)
2. go to wimax/profile/authentication settings (see the picture below)
3. click browse beside "MTK-Authorized Device Cert. File" and select the ".pem" file
4.click browse beside "Device Private key" and select the ".key" file
5. hit save

How to Hunt SMART MAC

1. download and install angry ip scanner DOWNLOAD HERE
2. go to Tools/Preferences/Ports/port selection input 22,23,80
3. go to Tools/Preferences/Ports&/Display results Tick/check "Host with open ports only"
4. hit OK
5. set the ip rage to "10.0.0.0"
6. set the netmask to "255.0.0.0"
7. leave the hostname blank
8. hit start

After having an iP with open port

1. example the only open port is only port "80" and telnet and ssh are closed
2. add "adv-firewall.html" instead of "index.html"
   for example  "10.x.x.x/adv-firewal.html/WWW_SID=SIDvalue"
3.  go to "Telnet" tab enable telnet
4. hit save

That's all Enjoy Surfing!!! :)

STEPS HOW TO RECONNECT SMARTBRO CANOPY

I.) Go to Control Panel - Network Connections. Hanapin mo yung connection ng SmartBRO Canopy, normally Local Area Connection.

II.) Once na nahanap mo na, right click the connection and select Properties.

III.) Under sa This connection uses the following items:, double-click yung Internet Protocol TCP/IP.

IV.) Set your IP address to 169.254.3.3, and subnet mask to 255.255.0.0.

V.) Click OK, and close all windows.

VI.) Open your internet browser, we prefer FireFox, and type in 169.254.1.1 sa address bar, this will take you to the Canopy MS.

Note: If this doesn’t work, probably your Canopy MS is blocked, or has been set to use a nonstandard IP address. This is where method two comes in.

STEPS IN SMARTBRO CANOPY HACKING

A1.) Follow steps 1-3 from the first method.

A2.) This time, set your IP address to 10.20.30.40, and subnet mask to 255.0.0.0

The following steps will help you identify your Canopy address, if ever nagbago na ung IP niya (hindi na 169.254.1.1).

A3.) Open the ms-dos command prompt. (on your start menu, select run, and type ‘cmd’)

A4.) Enter the following command: arp -a. It will display IP addresses connected to your network, look for the IP address beginning with 10 (10.xxx.xx.xx), this is your Canopy address. Note that i-disregard niyo lang ung ibang IP addresses, as wala naman tayong pag-gagamitan, and your Canopy address is not the one with 10.0.0.1.

A5.) Close command prompt and open your web browser (use FireFox) and enter your Canopy address sa address bar (10.xxx.xx.xx).

CONGRATS!!!. Napasok mo na yung Canopy page mo without any hassle. May nakausap akong technician once, sabi nila para makuha mo yung exact canopy address mo, akyatin mo lang ang bubong mo tapos tanggalin mo yung antenna, then hanapin mo yung sticker ng canopy , then convert the numbers into hexadecimals to get the IP Address of your canopy.

Now, to maximize your internet capability speed and accuracy , go to the Canopy page – Configuration – Quality of Service QoS. Siguruhin lang na walang values set to 256, if ever meron, then set that to 500.

Also, select Enabled dun sa Hi-Priority Channel.

Kung maganda connection mo, this should take you way beyond your bandwidth capacity, like 500-750kbps. Make sure na jitters is below 5, and di aabot ng 1.5 miles of air distance mo sa base station.